Product Search
 
Product Catalogue
New Products
Contact Us
FAQs
About Us
News & Events
Downloads
Enter your email address below to receive our newsletter.
 Text     HTML
 
Products » Solar Meters

Solar Meters
 
 
Solar System Analyzer
Click image to enlarge -
Click image to enlarge
MODEL: PROVA 1011

  • CE CAT II 1000V / CAT III 300V
  • I-V curve test for solar system.
  • Max. solar system power (Pmax) search by Auto-scan: 1000V, 12A (12000W capability).
  • The analyzer and the Remote Solar Detector is connected by Bluetooth wireless communication (Bluetooth 2.1 + EDR Class 1).
  • The Remote Solar Detector is moisture-proof.
  • Intelligent test logic with no personnel attendance required in the field. Solar system analyzer waits and tests the system until appropriate sunlight irradiance is detected.
  • Max. voltage (Vpm) at Pmax; Max. current (Ipm) at Pmax.
  • Voltage at open circuit (Voc); Current at short circuit (Isc).
  • Efficiency (%) calculation of solar system.
  • Temperature measurement of solar panels.
  • Irradiance measurement of sun light.
  • Series resistance (Rs) calculation of solar panels.
  • I-V curve with cursor to display each data point.
  • With data logging/open function, the I-V curves of solar system can be analyzed/recorded for a period of time (e.g. 60 min.).
  • Conversion of I-V curve under OPC to data under standard test condition (STC) based upon IEC standard
  • Provide Operating Condition (OPC) and Standard Test Condition (STC) test reports for verification of solar panel performance (OK, or NO OK).
  • Users can set up the parameters of solar panels; users can set up the series numbers of solar panels. Parameters of many solar panels can be measured in one measurement.
  • Irradiances & temperatures of solar panels can be continuously measured, monitored and recorded.
  • Built-in calendar clock.
  • Rechargeable lithium battery, low battery warning; AC power adaptor.
  • Optical USB cable for PC.
  • With OPTIONAL power clamps (SOLAR 15 DC Current Probe and SOLAR 21 AC Power Clamp), continuously measure/monitor/record the DC power output of solar system and the AC power output of inverter (1 phase or balanced 3 phases); calculate the efficiency of DC to AC power conversion and the efficiency of the max. output power.
 
 
Solar Module Analyzer
MODEL: PROVA 200

  • I-V curve test for solar cell, I-V curve with cursor
  • Maximum solar power (Pmax) search by auto-scan (60V, 6A)
  • Maximum voltage (V maxp) at Pmax
  • Maximum current (I maxp) at Pmax
  • Voltage at open circuit (V open)
  • Current at short-circuit (I short)
  • Calculation of efficiency (%)
  • Manual single point test
Click image to enlarge -
Click image to enlarge
 
 
Solar Module Analyzer
Click image to enlarge -
Click image to enlarge
MODEL: PROVA 210
    Photovoltaic I-V Curve Tester
  • I-V curve test for solar module, I-V curve with cursor
  • Max. solar cell/ module power (Pmax) search by auto-scan: 60V, 12A
  • Manual Single Point I-V test
  • Max. Voltage (Vmax) at Pmax
  • Max Current (Imax) at Pmax
  • Voltage at open circuit (Vopen)
  • Current at short circuit (Ishort)
  • Efficiency (%) calculation of solar panel
  • Real time data logging (programmable from 0 to 99min)
  • Optical USB cable for PC
 
 
Solar Module Analyzer
MODEL: PROVA 218
    Photovoltaic I-V Curve Tester
  • I-V curve test for solar module, I-V curve with cursor
  • Max. solar cell/ module power (Pmax) search by auto-scan: 85V, 8.5A
  • Manual Single Point I-V test
  • Max. Voltage (Vmax) at Pmax
  • Max Current (Imax) at Pmax
  • Voltage at open circuit (Vopen)
  • Current at short circuit (Ishort)
  • Efficiency (%) calculation of solar panel
  • Real time data logging (programmable from 0 to 99min)
  • Optical USB cable for PC
Click image to enlarge -
Click image to enlarge
 
 
Solar Power Meter
Click image to enlarge -
Click image to enlarge
MODEL: TES 132

  • 4 digit LCD reading.
  • Wide spectral range.
  • Excellent long term stability.
  • Cosine corrected.
  • Automatic transmission measurements.
  • Select either power or transmission.
  • Solar energy measurement.
  • Current time setting function.
  • User calibration factor setting function.
  • End-mount light sensor.
  • Select either W/m2 or Btu / (ft2 x h) units.
  • Data hold/MAX/MIN/AVG modes.
  • Auto Data Memory function. (microSD CARD 2GB)
  • Manual Data Memory and Read function. (99 sets)
  • Auto power off function.
  • USB interface.
 
 
Solar Power Meter
MODEL: TES 1333

  • Wide spectral range
  • Cosine corrected
  • Automatic transmission measurements
  • Select either power or transmission
  • User calibration factor setting function
  • Select either W/m2 or Btu/(ft2 x h) units
  • Data Hold/MAX/MIN/AVG modes
  • Data memory and read function. (99 sets)
Click image to enlarge -
Click image to enlarge
 
 
Solar Power Meter
Click image to enlarge -
Click image to enlarge
MODEL: TES 1333R

  • Wide spectral range
  • Cosine corrected
  • Automatic transmission measurements
  • Select either power or transmission
  • User calibration factor setting function
  • Select either W/m2 or Btu/(ft2 x h) units
  • Data Hold/MAX/MIN/AVG modes
  • Data memory and read function. (99 sets)
  • Auto data memory / RS-232 interface to PC
 
 
©2020 MTP Instruments Inc. All rights reserved.